Plastic Pipe Fittings

This fitting changes pipe direction by 90 degrees. It uses the same unplasticized polyvinyl chloride material as UPVC pipes. This ensures material compatibility and connection reliability.

This fitting changes pipe direction by 45 degrees. Compared to a 90-degree elbow, this product creates less flow resistance. It has less impact on media flow velocity. This makes it suitable for

This is a fitting for three-pipe junctions or branches. The T-shaped design has one inlet and two outlets, or vice versa. It can diversion media from the main pipe to two branches. Or it can merge

This fitting connects four pipes in a cross-shaped design. It has one inlet and three outlets, or three inlets and one outlet. You can use it to split main pipe media to three directions at once. Or

This is a basic fitting for straight-line connections of same-diameter pipes. It has sockets on both ends. You insert the ends of two pipes into each end. Solvent cement bonding creates a reliable

This fitting connects two pipes of different diameters. The large end connects to the larger pipe. The small end connects to the smaller pipe. This creates a smooth diameter transition. The design

This fitting provides detachable connections between pipes and equipment or valves. Flange connections allow easy installation, inspection, and replacement of piping. You do not need solvent cement

This fitting allows fast disconnection and reconnection of pipes. It has two fittings and a locking nut. The seal comes from an O-ring and threaded locking mechanism. You do not need solvent cement

This fitting closes the end of a pipe. It is also called a UPVC plug or UPVC end cover. You install it at the end of a pipeline or at reserved connection points. It prevents media leakage and keeps

This fitting changes pipe direction by 90 degrees in CPVC systems. It uses chlorinated polyvinyl chloride material. The fitting inherits CPVC's excellent heat resistance and chemical resistance. It

This fitting changes pipe direction by 45 degrees in CPVC systems. It produces less flow resistance than a 90-degree elbow. It has less impact on media flow velocity. This makes it suitable for

This fitting connects three pipes in a T-shaped configuration. It allows media to split from the main pipe to two branch lines. Or it can merge media from two branches into the main pipe. The fitting